-
20 classical problem of UV ink - Part 3
2022-03-11
Previous: 20 classical problem of UV ink - Part 2 12. What is the dyne level? Dyne/cm is a unit used to measure surface tension. This tension is caused by the intermolecular at...
Read more
-
The Development Prospects of Water-Based Inks
2022-03-24
Water-based ink is a uniform paste-like substance composed of binders, pigments, additives and other substances. The binder provides the necessary transfer performance of the ink, and the pigment give...
Read more
-
Problems and solutions in the gravure printing process 1
2022-04-28
1. White spots on the printing surface This refers to the irregular distribution of blanks in the graphic part of the substrate. When the surface of the paper or cardboard is not flat enough or the pa...
Read more
-
Problems and solutions in the gravure printing process 2
2022-05-07
9. Sticky pages The printed product that has been printed is glued to another sheet of paper. This is caused by the ink film being wet or being re-softened by the overprinted s...
Read more
-
Basic knowledge and classification of ink
2022-05-19
Today let us talk about ink,after your watch more other products information from about our websit, let us introduction about ink. Ink can be everywhere in our daily life, such...
Read more
-
Do you want to make inks good printability
2022-05-27
Everyone who does ink printing wants to make inks that have good printability. Do you know what factors affect the printability of inks? This article will definitely give you a clear understanding of ...
Read more
-
Development and application status of water-based flexographic inks at domestic and overseas
2022-06-13
The rapid development of flexographic printing (flexo printing) technology has greatly promoted the process of ink desolvation. Flexographic printing technology uses flexible rubber letterpress or pho...
Read more
-
Which products of Polylactic acid PLA resin can we supply ?
2022-10-14
New type Biodegradable material: PLA resin. PLA is a type of bio based degradable resin pellet made from starch raw materials proposed by renewable plant resources (e.g. Corn). Starch raw material is ...
Read more
-
The trend of "oil-to-water" drives the continuous increase in the penetration rate of acrylic emulsion
2022-10-31
The trend of "oil-to-water" drives the continuous increase in the penetration rate of acrylic emulsion, especially the high increase of styrene acrylic emulsion. Coatings can be roughly divided into o...
Read more
-
Adhesion problem of water-based acrylic resin on PET substrate
2022-10-31
Because of its own characteristics, PET substrate makes it difficult for water-based acrylic resin to have good adhesion on its surface, especially for optical-grade transparent PET film, which has a ...
Read more
-
Acrylic emulsion business pattern
2022-11-14
In the 1980s, international acrylic acid emulsion super manufacturers, including Rohm and Haas, BASF, and United Carbon, came to China to set up factories one after another. With their excellent produ...
Read more
-
Degradable food packaging material - the advantages and disadvantages of PLA
2022-12-02
As the global climate problem is becoming more and more serious, the marine ecological environment is gradually deteriorating. China, Europe and the United States have begun to restrict the use of "wh...
Read more