内页
Industry News
  • Polyamide resin industry related

    Polyamide resin industry related

    Polyamide resin was first developed and promoted by Henkel of Germany and Lauter of the United States, and Sunmide of Japan was mainly sold in Southeast Asia. At present, this company is still highly recognized in the Southeast Asian market. In recent years, Chinese products have also entered the international market one after another. When customers send inquiries for Polyamide resin, they usuall...

    2020-10-15
    Read more
  • Improvement of waterborne epoxy floor floating color and selection of disperse agent

    Improvement of waterborne epoxy floor floating color and selection of disperse agent

    Improvement of waterborne epoxy floor floating color and selection of dispersant Paint industry: In recent years, the national environmental protection policy has become increasingly strict, and the regulations have been gradually improved: the new national standard "GB/T22374-2018 Floor Coating Materials" was formally implemented in May 2019; in July this year, the national mandatory standard "GB...

    2020-09-18
    Read more
  • DT series Polyamide resin for alcohol soluble type

    DT series Polyamide resin for alcohol soluble type

    We usually call alcohol-soluble polyamide resin as ALCOHOL SOLUBLE POLYAMIDE RESIN. iSuo Chem brand alcohol-soluble Polyamide resin, also called alcohol-soluble PA resin. Currently, we mainly supply these below model number for different application requirements of our clients. So far, we can support DT610Y, DT610B, DT610A, DT612, DT626A and DT626B DT610Y PA resin, viscosity range is 60-100mPa.s. ...

    2020-09-11
    Read more
  • What can solve the problem of non-cracking of acrylic surface?

    What can solve the problem of non-cracking of acrylic surface?

    Thermoplastic acrylic resin is made on a relatively soft substrate. What can solve the problem of non-cracking? Answer summary Q: The problem of internal stress. If the internal stress is removed, it will not crack. This is an early problem. W: Add Vinyl resin (VAGH). You can add iSuo Chem Ternary Modified type. VAGH resin E: Soft resin can be added. If the resin hardness is too high, it will inev...

    2020-08-20
    Read more
  • Good adhesion resin and curing agent on the PP+PE bottle cap

    Good adhesion resin and curing agent on the PP+PE bottle cap

    Questions: Is there any better adhesive force of resin and curing agent which can be used on our PP, PE bottle caps? Answer summary: That is the resin itself is not working. The resin in the entire system should be replaced first. iSuo Chem CPP resin, Chlorinated PP We ever have one customer who have done polyketone resin + elastic rubber resin + CPP resin before. The effect is very good on this t...

    2020-08-14
    Read more
  • Technical index of chlorinated PP resin

    Technical index of chlorinated PP resin

    Molecular structure of chlorinated polypropylene resin (Chlorinated PP resin, CPP resin): CH3 | (一C一CH2一)n | Cl Chlorinated polypropylene resin mainly has the following quality indicators: Term Index Appearance White or Light yellow, Granule or powder Chlorinity, % 30+/- or As customer request Viscosity (Rotary viscometer  25+/-1 °C)mpa·s 300+/-50 Solubility, % ≤ 98 Water content,

    2020-07-31
    Read more
  • Industrial use of CPP resin

    Industrial use of CPP resin

    1. Chlorinated polypropylene is mainly used in the production of BOPP (biaxially oriented polypropylene) thin film composite ink raw material. 2. Chlorinated polypropylene can be used as a binder for BOPP film and paper; it can also be used as a press for BOPP thin film.Inner coating of sensitive tape; can also be used as the main resin of other adhesives. 3. Chlorinated polypropylene has goo...

    2020-06-24
    Read more
  • Structural characteristics of CPP resin

    Structural characteristics of CPP resin

    The specific structure of chlorinated polypropylene determines its special properties. 1. The melting point of chlorinated polypropylene decreases rapidly with the increase of the degree of chlorination, when the mass fraction of chlorine is 30% The point is the lowest, and as the chlorine content increases, its melting point rises sharply again. Homogeneous and heterogeneous chlorinated polypropy...

    2020-06-16
    Read more
  • Melting temperature and decomposition temperature of the resin

    Melting temperature and decomposition temperature of the resin

    Melting temperature and decomposition temperature of the resin Powder coating is generally applied to the object to be coated in powder state, and then it must be heated and baked to make the resin in the powder coating melt-leveling to form a film, or melt-leveling curing cross-linking to form a film. If the melting temperature and decomposition temperature of the resin are very close, once the b...

    2020-05-29
    Read more
  • Ban plastic - what should be used instead?

    Ban plastic - what should be used instead?

    Accelerate the development of alternative products "Plastic Restriction" changes to "Prohibited Plastic" and it is also necessary to replace the product in order to achieve a strong replacement. In fact, the implementation of the "plastic ban" does not prohibit all plastic products, but prohibits the manufacture, sale, and use of non-degradable plastic bags and plastic dishes. This requires accele...

    2020-05-15
    Read more
  • Plastic additives and plastic molding processes

    Plastic additives and plastic molding processes

    The plastic colorant consists of a high proportion of pigments or additives and a thermoplastic resin that is well dispersed. The selected iSuo Chem China resin series has a good wetting and dispersing effect on the colorant and a good compatibility with the material to be colored. Does the product seem to break more easily after using a certain color masterbatch? This can be due to...

    2020-05-07
    Read more
  • Which factors influence the color difference of plastic products

    Which factors influence the color difference of plastic products

    The plastic dye consists of a high proportion of pigments or additives and thermoplastic resin and is well dispersed. The selected resin has a good wetting and dispersing effect on the dye and a good compatibility with the material to be colored. Thermoplastic acrylic resin Why do the products that are injected by different injection molding machines have different colors with the same color maste...

    2020-04-30
    Read more
1 2 3 4 >>
[  A total of  4  pages]
leave a message leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.