-
Study on Synergistic Application of Antioxidant and Light Stabilizer
2022-07-01
The aging of the coating film is actually the result of the combined action of ultraviolet light and oxygen. This process includes two different processes: Light degradation and photooxidation. Howeve...
Read more
-
Inhibit or delay the photo-oxidation rate of the coating film
2022-06-24
With the rapid development of the national economy, the application of powder coatings in outdoor is more and more common. Therefore, the weather resistance and durability of powder coatings as protec...
Read more
-
Waterborne polyester is the product of coating technology science
2022-06-17
In the polymer synthesis industry, polyester is an important resin for synthetic fibers. The polyester used in the coatings industry generally refers to a linear or branched, low molecular weight amor...
Read more
-
Development and application status of water-based flexographic inks at domestic and overseas
2022-06-13
The rapid development of flexographic printing (flexo printing) technology has greatly promoted the process of ink desolvation. Flexographic printing technology uses flexible rubber letterpress or pho...
Read more
-
What is Chlorinated Rubber?
2022-06-02
English Name: Chlorianted Rubber, Chlorinated Rubber Powder, Parlon Powder, Rubber Chlorinated, Polyisoprene, Chlorinated. Cas No.:9006-03-5 Molecular Formula:[c10h11cl7]n Related Categories: Organic ...
Read more
-
Do you want to make inks good printability
2022-05-27
Everyone who does ink printing wants to make inks that have good printability. Do you know what factors affect the printability of inks? This article will definitely give you a clear understanding of ...
Read more
-
Basic knowledge and classification of ink
2022-05-19
Today let us talk about ink,after your watch more other products information from about our websit, let us introduction about ink. Ink can be everywhere in our daily life, such...
Read more
-
Problems and solutions in the gravure printing process 2
2022-05-07
9. Sticky pages The printed product that has been printed is glued to another sheet of paper. This is caused by the ink film being wet or being re-softened by the overprinted s...
Read more
-
Problems and solutions in the gravure printing process 1
2022-04-28
1. White spots on the printing surface This refers to the irregular distribution of blanks in the graphic part of the substrate. When the surface of the paper or cardboard is not flat enough or the pa...
Read more
English
français
русский
español
português
العربية
한국의
ไทย
Tiếng việt
Indonesia