-
Common problems after printing with water-based acrylic ink
2020-11-30
With the continuous improvement of people's awareness of environmental protection, water-based inks have attracted more and more attention due to their low pollution, low volatility, non-toxicity, and...
Read more
-
What is the difference between emulsion-based and solid acrylic resins?
2021-04-16
Acrylic resins are generally divided by appearance into Water-based emulsion acrylic resins and Water-based solid acrylic resins. Water-based emulsion resins are prepared by the addition of an em...
Read more
-
How to select water-based acrylic resin for water-based ink?
2021-06-17
First of all, water-based acrylic resin has the following performance in ink: 1. As a film-forming material of water-based ink, it can stick the pigment on the surface of the substrate. 2. It can make...
Read more
-
CPP can be used along with PU base Ink for BOPP printing?
2021-07-21
Many customers said that CPP cannot use with PU base ink for BOPP printing,can it really not be used in PU ink? PU based formulations are very unstable sometimes because of pigments sel...
Read more
-
Market Analysis of Water-based inks
2021-09-23
Water-based ink, also named Water borne ink, as the name implies, it is an ink that uses water as a solvent, and does not contain any solvents of benzene, esters, alcohols, and alkanes. It is characte...
Read more
-
20 classical problem of UV ink - Part 1
2022-02-11
1. What happens when the ink is over-cured? There is a theory that when the ink surface is exposed to too much ultraviolet light, it will become harder and harder. When people print another ink on thi...
Read more
-
The Development Prospects of Water-Based Inks
2022-03-24
Water-based ink is a uniform paste-like substance composed of binders, pigments, additives and other substances. The binder provides the necessary transfer performance of the ink, and the pigment give...
Read more
-
What additives are usually used in plastic production?
2022-04-14
Plastic additives, are compounds that must be added to improve the processing performance of the polymer (synthetic resin) or to improve the performance of the resin itself when the polymer (synthetic...
Read more
-
Problems and solutions in the gravure printing process 1
2022-04-28
1. White spots on the printing surface This refers to the irregular distribution of blanks in the graphic part of the substrate. When the surface of the paper or cardboard is not flat enough or the pa...
Read more
-
Problems and solutions in the gravure printing process 2
2022-05-07
9. Sticky pages The printed product that has been printed is glued to another sheet of paper. This is caused by the ink film being wet or being re-softened by the overprinted s...
Read more
-
Basic knowledge and classification of ink
2022-05-19
Today let us talk about ink,after your watch more other products information from about our websit, let us introduction about ink. Ink can be everywhere in our daily life, such...
Read more
-
Development and application status of water-based flexographic inks at domestic and overseas
2022-06-13
The rapid development of flexographic printing (flexo printing) technology has greatly promoted the process of ink desolvation. Flexographic printing technology uses flexible rubber letterpress or pho...
Read more