-
Composition of powder coating- resin
2020-05-29
Resin is the most important film-forming substance of powder coatings and the most important component that determines the properties and performance of powder coatings. The choice of resin types dete...
Read more
-
Common problems after printing with water-based acrylic ink
2020-11-30
With the continuous improvement of people's awareness of environmental protection, water-based inks have attracted more and more attention due to their low pollution, low volatility, non-toxicity, and...
Read more
-
How does the ink resin system affect the ink adhesion ?
2020-12-21
We all know that the main factors affecting ink adhesion are the ink resin system, pigment dispersion, the solvent system used and the surface properties of the substrate. Today we will talk about the...
Read more
-
Common hot melt adhesive forms
2021-08-24
1. Block and granular hot melt adhesives. This kind of hot melt adhesives are most regular in the market. Rounded and square blocks are regular in blocked product, flat, diamond and cylindrical granul...
Read more
-
Market Analysis of Water-based inks
2021-09-23
Water-based ink, also named Water borne ink, as the name implies, it is an ink that uses water as a solvent, and does not contain any solvents of benzene, esters, alcohols, and alkanes. It is characte...
Read more
-
Global pipeline protective coatings market
2021-12-17
A recent study shows that the global pipeline protective coatings market size is estimated to be about 7.5 billion U.S. dollars in 2021, and will reach 9.4 billion U.S. dollars...
Read more
-
The usual problem and methods for pearl ink?
2022-01-12
1.Poor pearl luster effect or no pearl luster effect (1) Check the mesh point whether jammed or not,or needs washing the mesh point.Whether the mesh point of printing plate is too shallow or not,...
Read more
-
20 classical problem of UV ink - Part 1
2022-02-11
1. What happens when the ink is over-cured? There is a theory that when the ink surface is exposed to too much ultraviolet light, it will become harder and harder. When people print another ink on thi...
Read more
-
20 classical problem of UV ink - Part 2
2022-02-23
Previous: 20 classical problem of UV ink - Part 1 Let's continue with the previous article and continue to talk about light-curable inks 6. What is the difference between millijoule and milliwatt? The...
Read more
-
20 classical problem of UV ink - Part 3
2022-03-11
Previous: 20 classical problem of UV ink - Part 2 12. What is the dyne level? Dyne/cm is a unit used to measure surface tension. This tension is caused by the intermolecular at...
Read more
-
Inhibit or delay the photo-oxidation rate of the coating film
2022-06-24
With the rapid development of the national economy, the application of powder coatings in outdoor is more and more common. Therefore, the weather resistance and durability of powder coatings as protec...
Read more
-
Performance indicator of resin testing: The Softening point of resin
2022-07-15
iSuoChem is an 15 years old resin brand since since 2007. We supply the technology support for different ink resin systems. In general, our customers buy different pigment, resin and additives ...
Read more