+86-17755187628
[email protected]
English
内页
Home /Resin /Hot melt adhesives /

Adhesive web

 /Low Melting Point Hot Melt Adhesive PES Web for Wall Covering
Adhesive web

Categories

Email:

[email protected]

Related Product

copolyester Adhesive Web copolyester Adhesive Web copolyester Adhesive Web copolyester Adhesive Web

Low Melting Point Hot Melt Adhesive PES Web for Wall Covering

Hot Melt Adhesive Web 5090, As a kind of Non-woven form hot melt adhesive, can be convenient to either continuous or intermittent processed.

  • Item No.:

    5090

  • Brand:

    iSuoChem

  • Color:

    White or Black

  • Appearance:

    Non-woven
  • Product Details

Hot melt PES web

Hot Melt Adhesive Copolyester Web 5090 

Spiderbond 5090 web adhesive is a nonwoven form hot melt adhesive produced based on co-polyester. Web adhesives handle like a fabric facilitating both intermittent and continuous processes. This CO-PES web is available in a range of basis weights from 6 grams to 100 grams per square meter.


adhesive web for garment


Adhesive Web Feature: hot melt, easy handle, Non-toxic and environmentally friendly.

Low melting point suitable for low working temperature.

VOC free adhesive in easy handle web form.

Strong bonding strength.

Good waterproof performance.

web form adhesive factory

non-woven form copolyester adhesive


Material properties:

Property

Detail or Method

Specification

Appearance

Bye eye

White web

Base

Co-polyester

Basis Weight Range

g/m²

6-100, tolerance ±10%

Width

cm

Max 300, tolerance 0-10mm

Melting range

DSC, ℃

78-92

Melt Viscosity

cps at 180℃

120,000

Density

1.1-1.2


5090 web can be activated with any of the following techniques: electric fusing press, heated rolls, heated air, radiant heat, or steam press. Dry heat activation recommend above 95°C.
Reactivation time is dependent upon technique, temperature, pressure, substrates, and adhesive thickness, but would typically be in a pressure of 1~3MPa to the adherend, andmaintain the pressure for 10~20 seconds to complete the bonding.
The surface of the adherend should be as clean and dry as possible, free of solvents and grease. Lower adherent surface temperatures or ambient temperatures will cause early adhesive coagulation, reducing open time and even causing adhesive shedding. Preheat the adherend if necessary.


textile hot melt adhesive web


5090 web adhesive is based upon high performance co-polyester polymer. This product offer good resistance to repeated home launderings, bond to a wide variety of textiles, foams, paper, leather, polymer materials, etc.

fabric hot melt adhesive packaging

5125 web adhesives are sold in roll form, pack in plastic bag and out side carton. Two rolls in one carton, 10 cartons on one pallet.

RELATED PRODUCTS

Hot Tags : Hot Melt Adhesive PES Web Hot melt net thermal bonding nonwovens hot melt glue sheet thermal bonding glue sheet thermoweb
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Subject : Low Melting Point Hot Melt Adhesive PES Web for Wall Covering
leave a message leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.