Acrylic resin is one of the most widely used resins in the world. Because of the different raw materials and preparation methods, thousands of products with different properties and different uses can be synthesized. Adhesives, coatings, and films synthesized by acrylic resins , Elastomers, medical materials, transparent materials, photosensitive materials, water-absorbent ...
Do you want to know what kind of resin is suiable for scerrn printing ink? After reading this artilce, I think you will know it clearly. Ther are many brands , many series of Solvent ink, but no matter which series are made up of resin, solvent, pigment, filler (or additives). At first we should know the solvent ink composition. Below resin are commonly used in screen printing ink: Vi...
Flexographic Print, also known as "Aniline Ink", it’s a direct letterpress rotary printing method, using a flexible raised image printing plate to provide a more flexible item Macromolecule synthetic rubber or new photosensitive resin is the plate material. The printing plate can be glued to the printing plate cylinder of variable repeating length. The printing plate is applied by a metal ink...
Hi, friends, Happy holidays! We will take 7 days off (Oct 1st tol Oct 7th 2021) to spend time with our families and friends for China’s National Day. So maybe we won’t be answering emails as quickly as usual. But,&n...
What are the white pigments commonly used in ink production? Titanium dioxide and lithopone are mainly used. Lithopone is a mixture of barium sulfate and zinc sulfide, containing a small amount of Zn0 impurities, and its molecular formula can be expressed as BaSO4.2Ns. In fact, there is no chemical combination between the constituent compounds in lithopone, and each of them exists independently in...
The solvent used for the connecting material is water first, but pure water (sterile water) is needed. Alcohols are mainly isopropanol, ethanol and so on. Water accounts for the main component, while alcohols only account for 5% to 6% or 20% to 30% of water, depending on the types and properties of resins and pigments. The use of alcohols is mainly to assist water to enhance the ability to dissolv...
In principle, all printed products printed with traditional solvent-based oils can be replaced by water-based inks. Water-based inks have been widely used in the printing of coated paper, white paper, corrugated paper and plastic film, and can be printed by flexographic, gravure, and mesh printing. In the U.S. printing industry ink market, the sales of water-based inks are more than two letters of...
⑴ Not scratch resistant： a. The coating film is too hard: switch to elastic resin; increase the amount of "688", reduce the amount of "BF", and reduce the amount of curing agent. b. The coating film is too soft: the amount of curing agent is not large, or the curing agent is not well stored or the main agent is volatilized, resulting in incomplete curing of the coating film; increase the amount of...
The Minister of Finance.. In response to the requests of the business community and international multinational companies to allow additional time for them to join the system as a final deadline: Continuation of the experimental application of the pre-registration system for shipments (ACI) in seaports until the end of September and the mandatory application from the beginning of October A last ch...
As the global call for environmental protection is increasing, environmental protection materials have begun to be widely used. Many countries have introduced some environmental protection policies, especially in the food packaging industry, which has become more and more stringent, restricting the use of many solvents. All these have brought pressure and motivation to change the ink printing indu...
1）Co-solvent type polyamide resin Recommend solvent: Toluene: IPA=1:1 40% resin: 60% solvent 2) Alcohol Soluble Polyamide Resin Recommend solvent: IPA and Ethyl Alcohol (Customer could adjust the ratio according to their formula. No recommend ratio, as different user will adjust the ratio according to their request about the ink dry speed, compatibility with other resin and pigment, co...
In the process of using adhesives, sometimes the bonding effect may not be good. There are many reasons for this situation, among which the pretreatment of the substrate is a big influence factor. If the surface of the bonded substrate is not clean, it will affect the intermolecular force and cause the paste to be not strong enough. So how should the substrate be treated before using the adhesive?...
English
français
русский
español
português
العربية
한국의
ไทย
Tiếng việt
Indonesia