+8613965049124
[email protected]
English
内页
Home /

News

 /

Industry News
Industry News

News

Email:

[email protected]

  • Ink Binder Resin Basics: What the Binder Actually Does in Flexo, Gravure and Laminating Inks

    Ink Binder Resin Basics: What the Binder Actually Does in Flexo, Gravure and Laminating Inks

    A binder resin is the ink component that ends up as the film. Pigment supplies the color; the binder resin locks that pigment onto film, foil or paper, and it handles the quiet jobs as well: wetting pigment during dispersion, setting gloss, controlling how fast solvent leaves the print, deciding whether a laminated pouch keeps its peel strength after a retort cycle. Pick it badly and the failure r...

    2026-09-11
    Read more
  • Polyamide Resin Supplier Audit Checklist: COA, Batch Consistency and Sample Verification

    Polyamide Resin Supplier Audit Checklist: COA, Batch Consistency and Sample Verification

    Quick Answer Before approving a polyamide resin supplier, verify four things: batch-to-batch specification control, grade- and lot-specific documentation, representative sample performance in your own ink system, and the supplier's ability to repeat the approved quality on commercial orders. For gravure ink, viscosity, softening point, acid/amine value, solubility and application fit should be tra...

    2026-09-11
    Read more
  • Ink Binder Resin Troubleshooting Guide: Diagnosing Adhesion, Blocking and Gel Problems

    Ink Binder Resin Troubleshooting Guide: Diagnosing Adhesion, Blocking and Gel Problems

    Quick Answer When ink peels, blocks, rubs off, turns milky, gels in storage or stays tacky, check the binder system before changing the pigment. The first diagnostic points are substrate treatment, resin-to-substrate compatibility, softening point or film hardness, solvent balance, solubility window and drying behavior. A symptom-to-property check followed by a tape test, stack test and viscosity ...

    2026-09-11
    Read more
  • Polyamide Resin for Gravure Ink: Grade Selection Based on Solvent System and Film Performance

    Polyamide Resin for Gravure Ink: Grade Selection Based on Solvent System and Film Performance

      Quick Answer For gravure ink, start with the solvent system and printed substrate, then compare viscosity, softening point, acid/amine value and the actual solubility window. Alcohol-soluble grades suit ethanol-rich systems, while co-solvent/benzene-soluble grades suit mixed aromatic/alcohol systems used in many plastic and paper gravure inks. Final approval should come from a lab print tri...

    2026-09-11
    Read more
  • Choosing an Acrylic Resin Supplier by Tg Range: What 2026 Buyers Compare

    Choosing an Acrylic Resin Supplier by Tg Range: What 2026 Buyers Compare

      The Tg range a supplier catalogs tells you more about the company than the product. A catalog spanning low-, mid- and high-Tg acrylics suggests a real resin maker with broad chemistry; a one-number shop suggests a trader with a single source. Buyers in 2026 compare three things before sampling: catalog breadth across Tg, datasheet depth, and how the supplier answers the MFT question. iSuoCh...

    2026-09-01
    Read more
  • High Tg vs Low Tg Acrylic Resin: Exterior Durability or Interior Flexibility?

    High Tg vs Low Tg Acrylic Resin: Exterior Durability or Interior Flexibility?

    High-Tg acrylic resin earns its keep outdoors; low-Tg acrylic resin earns its keep on flexible and impact-prone jobs. For exterior metal and architectural coatings, a harder film resists dirt, abrasion and weathering better. For interior trim, plastics and coil-fed lines, a lower Tg bends instead of cracking. Neither is better in the abstract. Each is better inside its own application. iSuoChem, a...

    2026-09-01
    Read more
  • Acrylic Resin Tg vs Molecular Weight, MEQ and Solids: What Formulators Actually Compare

    Acrylic Resin Tg vs Molecular Weight, MEQ and Solids: What Formulators Actually Compare

    Tg alone does not tell you how an acrylic resin will behave in a formula. Two resins with the same Tg can differ wildly in viscosity, crosslink demand and film toughness, because molecular weight, acid value and solids all move the final result. The comparison that matters on a datasheet is the whole block of numbers read together. iSuoChem, a Chinese specialty resin manufacturer with its coating ...

    2026-09-01
    Read more
  • How to Choose Acrylic Resin Tg for Wood Coatings: Sanding, Blocking and Shop-Temperature Cure

    How to Choose Acrylic Resin Tg for Wood Coatings: Sanding, Blocking and Shop-Temperature Cure

    For wood coatings, Tg decides the three things furniture makers complain about most: sandability, block resistance and finish feel. Set the Tg too low and panels stick together in the stack. Set it too high and the film turns glassy, chips at the edges and refuses to recoat cleanly. The right window usually sits between 15°C and 35°C for interior wood lacquers. iSuoChem, a Chinese specialt...

    2026-09-01
    Read more
  • Acrylic Resin Tg Selection for Coatings: A Formulator's 2026 Guide

    Acrylic Resin Tg Selection for Coatings: A Formulator's 2026 Guide

    Glass transition temperature, Tg, is the single most useful number on an acrylic resin datasheet. Choose it correctly and hardness, flexibility and durability line up. Choose it poorly and the film fails somewhere you cannot easily fix. This guide walks through the selection logic professional formulators apply in 2026, from Tg definitions to a five-step selection process. iSuoChem, a Chinese spec...

    2026-09-01
    Read more
  • Replacing Mowithal B30H and B60H in Coatings: A PVB Viscosity Grade Substitution Guide

    Replacing Mowithal B30H and B60H in Coatings: A PVB Viscosity Grade Substitution Guide

    Direct Answer PVB resin viscosity grade is the most important decision a 2026 buyer makes on the first PO, because the same PVB chemistry at 8 mPa·s, 30 mPa·s and 200 mPa·s is not the same product for a primer, a ceramic binder or a photovoltaic encapsulant. Most of the generic listicles on the open web don't separate the grades, and a serious formulator usually ends up wastin...

    2026-08-28
    Read more
  • PVB Resin Viscosity Grade Market 2026: B‑72, B‑79, B‑98 Demand and Photovoltaic Encapsulation Trends

    PVB Resin Viscosity Grade Market 2026: B‑72, B‑79, B‑98 Demand and Photovoltaic Encapsulation Trends

    Direct Answer PVB resin viscosity grade is the most important decision a 2026 buyer makes on the first PO, because the same PVB chemistry at 8 mPa·s, 30 mPa·s and 200 mPa·s is not the same product for a primer, a ceramic binder or a photovoltaic encapsulant. Most of the generic listicles on the open web don't separate the grades, and a serious formulator usually ends up wastin...

    2026-08-28
    Read more
  • Low vs Medium vs High Viscosity PVB: A 2026 Formulator's Selection Guide

    Low vs Medium vs High Viscosity PVB: A 2026 Formulator's Selection Guide

    Direct Answer PVB resin viscosity grade is the most important decision a 2026 buyer makes on the first PO, because the same PVB chemistry at 8 mPa·s, 30 mPa·s and 200 mPa·s is not the same product for a primer, a ceramic binder or a photovoltaic encapsulant. Most of the generic listicles on the open web don't separate the grades, and a serious formulator usually ends up wastin...

    2026-08-28
    Read more
1 2 3 4 5 6 7 8 9 10 >>
[  A total of  13  pages]
leave a message leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.